(6-10 mm)
PMMA acrylic flooring system.
Recommended for indoor and outdoor areas, which are subject to extremely heavy mechanical charges, and is therefore used for road bridges, parking decks, driving ramps, loading areas, indoor industrial areas with exceptionally heavy charges, or other places where a floor with extremely high resistance to wear and strokes is required.
Very Good Chemical Resistance
Weatherproof & UV Resistant
Fast Installation
Curing Down to -30°C
Low Maintenance Cost
Non Slip Seamless & Flexible Finish
Damp Proof Membrane Layer
For all types of exterior use and extremely heavy loaded industrial floors, in combination with high demands to flexibility. Dencryl Bridge offers high wearability, impact and chemical resistant. The very fast curing of Dencryl Bridge means, that eventual traffic blocking time is minimized while installing the system.
Road bridges
Parking decks
Driving ramps
Loading areas
| LAYER | PRODUCT | CONSUMPTION (kg/m²) | INTERMEDIATE | THICKNESS (mm) | APPLICATION |
|---|---|---|---|---|---|
| Primer | Dencryl P11 | 0.3 - 0.5 | Scatter Quartz 0.7 - 1.2 mm on wet surface | Min 0.5 | Rubber squegee and paint roller |
| Membrane | Dencryl M42 | 2.0 - 3.0 | none | Min 2.0 | Notched rubber squegee spike roller |
| Wear layer | Dencryl M42 | 4 + 8 kg bauxite | Scatter Bauxite on wet surface | Min 6.0 | Spike metal rake and trowel board |
| Sealcoat | Dencryl S31 | 1.0 - 2.0 | None | 1.0 - 1.5 | Rubber squegee and paint roller |
Properties
Value
Fully cured at 20°C
2 hours
Applied thickness
6 - 10 mm
Water Permeability
Nil – Karsten test (impermeable)
Hardness
SHORE D 80
Compressive strength
85 MPa
Reaction to fire
Dfl-s1
Temperature resistance
Up to 80°C at 6 mm
Thermal expansion coefficient
<40 ppm
Abrasion resistance
50 mg / 1000 cycles (Taber Abrader)
Anti-slip according to DIN 51130
R9 – R13
Food Contact
No contamination
Dencoat India
2026-02-11
Dencoat India, a leading player in building materials and surface coatings, has just introduced a new type of waterproofing membrane that promises to redefine standards for moisture and water intrusio...
READ MORE
Nordzucker, Denmark
Dencoat Danmark
2026-02-11
Being one of two sugar factories in Denmark, Nordsucker Nakskov was once the largest sugar factory in Northern Europe. Built in1882, it could process 300 tonnes of sugar beet per day. This made the f...
READ MORE
Diesel Technic, Dubai
Dencoat India
2025-02-28
DUBAI, EMIRATES OF DUBAI, UNITED ARAB EMIRATES, February 20, 2025 Duphill Technical Solutions LLC has successfully completed the flooring project for Diesel Technic’s cutting-edge warehousing f...
READ MORE
