(3-4 mm)
Polyaspartic based flooring system.
Recommended for areas, which are subject to moderate mechanical or chemical wear with high hygienic demands, such as food industry, wash rooms, and other areas, where an anti-slip surface and easily cleanable floor is required.
Aesthetically Pleasing, Silkmat Surface
Very Good Chemical Resistance
Weatherproof & UV Resistant
Fast Installation
Low Maintenance Cost
Non Slip Finish if required
Easy to Clean & Sterilize
For all types of medium load industrial floors, in combination with high demands to hygiene and cleanability. Denspartic Standard is flexible with excellent wearability, impact and chemical resistance. Denspartic Standard is easy to clean and maintain in a hygienic condition. The very fast curing of Denspartic means, that eventual production stop is minimized while installing the floor.
Wet areas with anti-slip requirements
Wash & bath rooms
Food & Beverage
| LAYER | PRODUCT | CONSUMPTION (kg/m²) | INTERMEDIATE | THICKNESS (mm) | APPLICATION |
|---|---|---|---|---|---|
| Primer | Denspartic AP | 0.3 - 0.5 | Scatter quartz 0.7 - 1.2 on wet surface | Min 0.3 | Rubber squeegee and paint roller |
| Wear Layer | Denspartic ACB + Color Quartz | 1.5 + 4.0 | Full broadcast of Color Quartz on wet surface | 3.0 - 4.0 | Notched rubber squegee and trowel |
| Top coat | Denspartic AS | 0,7 - 1.2 | None | 0.7 - 1.2 | Rubber squegee and paint roller |
Properties
Value
Abrasion resistance
50 mg / 1000 cycles (Taber Abrader)
Anti-slip according to DIN 51130
R9 – R13
Applied thickness
2 - 4 mm
Bond strength
>1.5 MPa
Compressive strength
60 MPa
Food Contact
No contamination
Fully cured at 20°C
2 hours
Hardness
SHORE D 40
Reaction to fire
Bfl-s1
Temperature resistance
Up to 80°C
Thermal conductivity
< 0,4 W/m·K
Thermal expansion coefficient
<40 ppm
Water Permeability
Nil – Karsten test (impermeable)
Dencoat India
2026-02-11
Dencoat India, a leading player in building materials and surface coatings, has just introduced a new type of waterproofing membrane that promises to redefine standards for moisture and water intrusio...
READ MORE
Nordzucker, Denmark
Dencoat Danmark
2026-02-11
Being one of two sugar factories in Denmark, Nordsucker Nakskov was once the largest sugar factory in Northern Europe. Built in1882, it could process 300 tonnes of sugar beet per day. This made the f...
READ MORE
Diesel Technic, Dubai
Dencoat India
2025-02-28
DUBAI, EMIRATES OF DUBAI, UNITED ARAB EMIRATES, February 20, 2025 Duphill Technical Solutions LLC has successfully completed the flooring project for Diesel Technic’s cutting-edge warehousing f...
READ MORE
