(2-4 mm)
PMMA based flooring system.
Dencryl Topfloor with a smooth structure is ideal for areas, which are subject to heavy mechanical and chemical wear, with high demands for being free of dust, such as work rooms, storage rooms, laboratories, etc. Dencryl Topfloor is also suitable for renovation of older Dencryl floorings.
Aesthetically Pleasing, Silkmat Surface
Very Good Chemical Resistance
Fast Installation
Curing Down to -30°C
Low Maintenance Cost
Non Slip Finish if required
UV Resistant
Easy to Clean & Sterilize
Dencryl Topfloor floorings are flexible with excellent wearability, impact and chemical resistance. Dencryl Topfloor is easy to clean and maintain in a hygienic condition. Typical areas of use are workshops, warehouses, exhibition areas, laboratories, canteens, bathroom facilities, offices and corridors. Dencryl Topfloor is used also to refresh or renovate old acrylic floors. The very fast curing of Dencryl floorings means, that an eventual production stop is minimized while installing the floor.
Work rooms
Storage rooms
Laboratories
| LAYER | PRODUCT | CONSUMPTION (kg/m²) | INTERMEDIATE | THICKNESS (mm) | APPLICATION |
|---|---|---|---|---|---|
| Primer | Dencryl P11 | 0.3 - 0.5 | sand scatter (optional) | Min 0.3 | Rubber squegee and paintroller |
| Wear layer | Dencryl T1 | 2.5 - 3.0 | None | 2 - 4 mm | Notched rubber squeegee and spike roller |
| Top coat | Dencryl S32 | 0.3 - 0.5 | None | min 0.5 | Rubber squegee and paint roller |
Properties
Value
Fully cured at 20°C
2 hours
Applied thickness
2 - 4 mm
Water Permeability
Nil – Karsten test (impermeable)
Hardness
SHORE D 40
Compressive strength
40 MPa
Reaction to fire
Dfl-s1
Bond strength
>1.5 MPa
Temperature resistance
Up to 80°C at 4 mm
Thermal expansion coefficient
<40 ppm
Abrasion resistance
50 mg / 1000 cycles (Taber Abrader)
Thermal conductivity
< 0,4 W/m·K
Anti-slip according to DIN 51130
R9 – R13
Food Contact
No contamination
Dencoat India
2026-02-11
Dencoat India, a leading player in building materials and surface coatings, has just introduced a new type of waterproofing membrane that promises to redefine standards for moisture and water intrusio...
READ MORE
Nordzucker, Denmark
Dencoat Danmark
2026-02-11
Being one of two sugar factories in Denmark, Nordsucker Nakskov was once the largest sugar factory in Northern Europe. Built in1882, it could process 300 tonnes of sugar beet per day. This made the f...
READ MORE
Diesel Technic, Dubai
Dencoat India
2025-02-28
DUBAI, EMIRATES OF DUBAI, UNITED ARAB EMIRATES, February 20, 2025 Duphill Technical Solutions LLC has successfully completed the flooring project for Diesel Technic’s cutting-edge warehousing f...
READ MORE
